Outlets That Do Not Work
A bad receptacle, a tripped GFCI, a loose wire, or a fault further down the circuit will all kill power. We test the circuit to find where power is being lost.
Residential Electrical Service
When an outlet goes dead, a breaker keeps tripping, or the lights start flickering, the first step is finding out why.
Schedule Electrical Service Call NowClear answers. Safe repairs.
John Calhoun Electric & HVAC provides electrical repair and troubleshooting for homeowners throughout Roanoke, VA and nearby communities. We service outlets, switches, breakers, lighting, wiring, GFCIs, circuits, panels, and other common electrical problems.
Electrical trouble is not always caused by the part that stopped working. A dead outlet is often fed by a tripped GFCI in another room. A breaker trips because something on that circuit is wrong. Flickering lights usually mean a loose connection, not a bad fixture.
Our goal is to locate the real problem, make the repair safely, and confirm that the circuit is working properly.
Professional troubleshooting
Here is what we check:
In one home, several receptacles had stopped working. The electrician found a loose neutral connection in an outlet along with unsafe wiring at the dishwasher. When the trouble runs past a single repair, we talk about rewiring the affected area. After correcting both issues, the circuit returned to normal operation.
At another home, a breaker that would not reset was traced to an outdoor-lighting circuit. Isolating the lights restored the rest of the circuit, and further testing indicated a likely short in the underground wiring. Resetting the breaker or swapping the outlet leaves the actual fault sitting there.
Common service calls
A bad receptacle, a tripped GFCI, a loose wire, or a fault further down the circuit will all kill power. We test the circuit to find where power is being lost.
A breaker that keeps tripping is reacting to something. An overload, a short, damaged wiring, or a bad appliance. Diagnose it rather than reset it again. If the equipment itself is worn out, we look at whether it needs panel work.
We replace failed GFCIs, restore power to protected outlets, and correct wiring that keeps a GFCI from operating properly in kitchens, bathrooms, garages, basements, and outdoor areas.
Lighting trouble starts at the bulb, the fixture, the switch, or the wiring. If a new bulb does not fix it, we look behind the switch and the fixture.
We troubleshoot and replace standard switches, three-way switches, dimmers, combination switches, and controls for lights and exhaust fans. We also handle planned outlet, lighting, and control upgrades.
Loose connections cause power that comes and goes, and they run hot. We repair damaged conductors, loose neutrals, poor connections, and improperly installed wiring.
If the trouble starts when the dishwasher or the AC kicks on, we find out whether it is the outlet, the circuit, or the appliance.
We troubleshoot exterior outlets, GFCIs, lighting, pool subpanels, and underground circuits exposed to moisture, weather, and ground movement.
Electrical repair for Roanoke homeowners
A small symptom often points somewhere else on the circuit. John Calhoun Electric & HVAC brings a practical, thorough approach to everything from failed outlets and switches to wiring faults and harder-to-find circuit problems.
If you have a dead outlet, a breaker that keeps tripping, flickering lights, a failed switch, or another electrical concern, contact our team to schedule service in Roanoke or a nearby community.
Schedule Electrical Service